"""
This backend is based on the 2D graphics package Grace (available at
http://plasma-gate.weizmann.ac.il/Grace). The connection with Python is
handled by the grace_np.py module written by Michael Haggerty. This module
is available in the pygrace module by Mike McKerns (see
http://www.its.caltech.edu/~mmckerns/software.html). Only curve plotting is
currently available. However, histograms and pie charts might be added in
the future. The Grace backend can be used by
python somefile.py --SCITOOLS_easyviz_backend grace
or one can specify the backend in the SciTools configuration file
scitools.cfg under the [easyviz] section
[easyviz]
backend = grace
and then
from scitools.std import *
or if just easyviz is needed
from scitools.easyviz import *
REQUIREMENTS:
Grace
pygrace
Known issues:
- To be able to store a copy of a plot with the hardcopy command, one must
disable safe mode with the -nosafe option when running Grace. One can do
this by adding the following line to GraceProcess.__init__ in grace_np.py
(e.g. at line 130):
cmd = cmd + ('-nosafe',)
- PDF output does not seem to work (at least on my configuration).
Tip:
- One way to create axes at arbitrary positions is to use the axes command
together with the viewport optional argument. In the Grace backend this
argument should be given as the list [xmin,ymin,xmax,ymax] where (xmin,ymin)
is the lower-left corner and (xmax,ymax) is the upper-right corner. An
example is provided next.
>>> x = seq(-3,3,0.1)
>>> subplot(2,2,3)
>>> plot(x,x**2,'ro:2',x,8*sin(2*pi*x),'g',x,x**3,'mx')
[<scitools.easyviz.common.Line object at 0xb15645ac>]
>>> subplot(2,2,4)
>>> plot(x,x**3,'r+',title='subplot(2,2,4)')
[<scitools.easyviz.common.Line object at 0xb31596ac>]
>>> ax = axes(viewport=[0.1, 0.55, 0.9, 0.9])
>>> plot(ax,x,cos(x),'bd--',axis=[-2,4,-1,2]')
"""
from __future__ import division
from common import *
from scitools.globaldata import DEBUG, VERBOSE
from scitools.misc import test_if_module_exists
if test_if_module_exists('pygrace', msg='You need to install the pygrace package from http://www.cacr.caltech.edu/~mmckerns/pygrace.html (Not PyGrace from sourceforge!) and the grace program.', abort=False):
from pygrace import grace_np
else:
raise ImportError('Cannot import grace_np from pygrace')
[docs]class GraceBackend(BaseClass):
[docs] def __init__(self):
BaseClass.__init__(self)
self._init()
def _init(self, *args, **kwargs):
"""Perform initialization that is special for this backend."""
# Set docstrings of all functions to the docstrings of BaseClass
# The exception is if something is very different
self.figure(self.getp('curfig'))
# conversion tables for format strings:
self._markers = {
'': 0, # no marker
'.': 0, # dot --> no marker
'o': 1, # circle
'x': 9, # cross
'+': 8, # plus sign
'*': 10, # asterisk
's': 2, # square
'd': 3, # diamond
'^': 4, # triangle (up)
'v': 6, # triangle (down)
'<': 5, # triangle (left)
'>': 7, # triangle (right)
'p': 2, # pentagram --> square
'h': 3, # hexagram --> diamond
}
self._colors = {
'': 4, # no color --> blue
'r': 2, # red
'g': 3, # green
'b': 4, # blue
'c': 9, # cyan
'm': 10, # magenta
'y': 5, # yellow
'k': 1, # black
'w': 0, # white
}
self._line_styles = {
'': None, # no line
'-': 1, # solid line
':': 2, # dotted line
'-.': 6, # dash-dot line
'--': 4, # dashed line
}
# convert table for colorbar location:
self._colorbar_locations = {
'North': None,
'South': None,
'East': None,
'West': None,
'NorthOutside': None,
'SouthOutside': None,
'EastOutside': None,
'WestOutside': None,
}
if DEBUG:
print "Setting backend standard variables"
for disp in 'self._markers self._colors self._line_styles'.split():
print disp, eval(disp)
def _set_scale(self, ax):
"""Set linear or logarithmic (base 10) axis scale."""
if DEBUG:
print "Setting scales"
scale = ax.getp('scale')
if scale == 'loglog':
# use logarithmic scale on both x- and y-axis
self._g('xaxes scale logarithmic')
self._g('yaxes scale logarithmic')
elif scale == 'logx':
# use logarithmic scale on x-axis and linear scale on y-axis
self._g('xaxes scale logarithmic')
self._g('yaxes scale normal')
pass
elif scale == 'logy':
# use linear scale on x-axis and logarithmic scale on y-axis
self._g('xaxes scale normal')
self._g('yaxes scale logarithmic')
elif scale == 'linear':
# use linear scale on both x- and y-axis
self._g('xaxes scale normal')
self._g('yaxes scale normal')
def _set_labels(self, ax):
"""Add text labels for x-, y-, and z-axis."""
if DEBUG:
print "Setting labels"
xlabel = ax.getp('xlabel')
ylabel = ax.getp('ylabel')
zlabel = ax.getp('zlabel')
self._g('xaxis label "%s"' % xlabel)
self._g('yaxis label "%s"' % ylabel)
if zlabel:
# add a text label on z-axis
pass
def _set_title(self, ax):
"""Add a title at the top of the axis."""
if DEBUG:
print "Setting title"
title = self._fix_latex(ax.getp('title'))
self._g('subtitle "%s"' % title) # set title
def _set_limits(self, ax):
"""Set axis limits in x, y, and z direction."""
if DEBUG:
print "Setting axis limits"
mode = ax.getp('mode')
if mode == 'auto':
# let plotting package set 'nice' axis limits in the x, y,
# and z direction. If this is not automated in the plotting
# package, one can use the following limits:
#xmin, xmax, ymin, ymax, zmin, zmax = ax.get_limits()
self._g('autoscale xaxes')
self._g('autoscale yaxes')
elif mode == 'manual':
# (some) axis limits are frozen
xmin = ax.getp('xmin')
xmax = ax.getp('xmax')
if xmin is not None and xmax is not None:
# set x-axis limits
self._g('world xmin %s' % xmin)
self._g('world xmax %s' % xmax)
else:
# let plotting package set x-axis limits or use
#xmin, xmax = ax.getp('xlim')
self._g('autoscale xaxes')
ymin = ax.getp('ymin')
ymax = ax.getp('ymax')
if ymin is not None and ymax is not None:
# set y-axis limits
self._g('world ymin %s' % ymin)
self._g('world ymax %s' % ymax)
else:
# let plotting package set y-axis limits or use
#ymin, ymax = ax.getp('ylim')
self._g('autoscale yaxes')
zmin = ax.getp('zmin')
zmax = ax.getp('zmax')
if zmin is not None and zmax is not None:
# set z-axis limits
pass
else:
# let plotting package set z-axis limits or use
#zmin, zmax = ax.getp('zlim')
pass
elif mode == 'tight':
# set the limits on the axis to the range of the data. If
# this is not automated in the plotting package, one can
# use the following limits:
xmin, xmax, ymin, ymax, zmin, zmax = ax.get_limits()
self._g('world xmin %s' % xmin)
self._g('world xmax %s' % xmax)
self._g('world ymin %s' % ymin)
self._g('world ymax %s' % ymax)
elif mode == 'fill':
# not sure about this
pass
def _set_position(self, ax):
"""Set axes position."""
rect = ax.getp('viewport')
if rect:
# axes position is defined. In Matlab rect is defined as
# [left,bottom,width,height], where the four parameters are
# location values between 0 and 1 ((0,0) is the lower-left
# corner and (1,1) is the upper-right corner).
# NOTE: This can be different in the plotting package.
# In Grace the position is specified as [xmin,ymin,xmax,ymax],
# where (xmin,ymin) is the lower-left corner and (xmax,ymin)
# is the top-right corner.
xmin, ymin, xmax, ymax = rect
if not ax.getp('pth'):
self._g('view %s, %s, %s, %s' % (xmin, ymin, xmax, ymax))
def _set_daspect(self, ax):
"""Set data aspect ratio."""
if ax.getp('daspectmode') == 'manual':
dar = ax.getp('daspect') # dar is a list (len(dar) is 3).
pass
else:
# daspectmode is 'auto'. Plotting package handles data
# aspect ratio automatically.
pass
def _set_axis_method(self, ax):
method = ax.getp('method')
if method == 'equal':
# tick mark increments on the x-, y-, and z-axis should
# be equal in size.
pass
elif method == 'image':
# same effect as axis('equal') and axis('tight')
pass
elif method == 'square':
# make the axis box square in size
pass
elif method == 'normal':
# full size axis box
pass
elif method == 'vis3d':
# freeze data aspect ratio when rotating 3D objects
pass
def _set_coordinate_system(self, ax):
"""
Use either the default Cartesian coordinate system or a
matrix coordinate system.
"""
direction = ax.getp('direction')
if direction == 'ij':
# Use matrix coordinates. The origin of the coordinate
# system is the upper-left corner. The i-axis should be
# vertical and numbered from top to bottom, while the j-axis
# should be horizontal and numbered from left to right.
self._g('yaxes invert on')
elif direction == 'xy':
# use the default Cartesian axes form. The origin is at the
# lower-left corner. The x-axis is vertical and numbered
# from left to right, while the y-axis is vertical and
# numbered from bottom to top.
self._g('yaxes invert off')
def _set_box(self, ax):
"""Turn box around axes boundary on or off."""
if DEBUG:
print "Setting box"
if ax.getp('box'):
# display box
pass
else:
# do not display box
pass
def _set_grid(self, ax):
"""Turn grid lines on or off."""
if DEBUG:
print "Setting grid"
if ax.getp('grid'):
# turn grid lines on
self._g('xaxis tick major linestyle 2')
self._g('xaxis tick major grid on')
self._g('yaxis tick major linestyle 2')
self._g('yaxis tick major grid on')
else:
# turn grid lines off
self._g('xaxis tick major linestyle 1')
self._g('xaxis tick major grid off')
self._g('yaxis tick major linestyle 1')
self._g('yaxis tick major grid off')
def _set_hidden_line_removal(self, ax):
"""Turn on/off hidden line removal for meshes."""
if DEBUG:
print "Setting hidden line removal"
if ax.getp('hidden'):
# turn hidden line removal on
pass
else:
# turn hidden line removal off
pass
def _set_colorbar(self, ax):
"""Add a colorbar to the axis."""
if DEBUG:
print "Setting colorbar"
cbar = ax.getp('colorbar')
if cbar.getp('visible'):
# turn on colorbar
cbar_title = cbar.getp('cbtitle')
cbar_location = self._colorbar_locations[cbar.getp('cblocation')]
# ...
else:
# turn off colorbar
pass
def _set_caxis(self, ax):
"""Set the color axis scale."""
if DEBUG:
print "Setting caxis"
if ax.getp('caxismode') == 'manual':
cmin, cmax = ax.getp('caxis')
# NOTE: cmin and cmax might be None:
if cmin is None or cmax is None:
cmin, cmax = [0,1]
# set color axis scaling according to cmin and cmax
pass
else:
# use autoranging for color axis scale
pass
def _set_colormap(self, ax):
"""Set the colormap."""
if DEBUG:
print "Setting colormap"
cmap = ax.getp('colormap')
# cmap is plotting package dependent
def _set_view(self, ax):
"""Set viewpoint specification."""
if DEBUG:
print "Setting view"
cam = ax.getp('camera')
view = cam.getp('view')
if view == 2:
# setup a default 2D view
pass
elif view == 3:
az = cam.getp('azimuth')
el = cam.getp('elevation')
if az is None or el is None:
# azimuth or elevation is not given. Set up a default
# 3D view (az=-37.5 and el=30 is the default 3D view in
# Matlab).
pass
else:
# set a 3D view according to az and el
pass
if cam.getp('cammode') == 'manual':
# for advanced camera handling:
roll = cam.getp('camroll')
zoom = cam.getp('camzoom')
dolly = cam.getp('camdolly')
target = cam.getp('camtarget')
position = cam.getp('campos')
up_vector = cam.getp('camup')
view_angle = cam.getp('camva')
projection = cam.getp('camproj')
def _set_axis_props(self, ax):
if DEBUG:
print "Setting axis properties"
self._set_title(ax)
self._set_scale(ax)
self._set_limits(ax)
self._set_position(ax)
self._set_axis_method(ax)
self._set_daspect(ax)
self._set_coordinate_system(ax)
self._set_hidden_line_removal(ax)
self._set_colorbar(ax)
self._set_caxis(ax)
self._set_colormap(ax)
self._set_view(ax)
if ax.getp('visible'):
self._set_labels(ax)
self._set_box(ax)
self._set_grid(ax)
self._g('xaxis bar on')
self._g('xaxis tick on')
self._g('xaxis ticklabel on')
self._g('yaxis bar on')
self._g('yaxis tick on')
self._g('yaxis ticklabel on')
else:
# turn off all axis labeling, tickmarks, and background
self._g('xaxis bar off')
self._g('xaxis label ""')
self._g('xaxis tick off')
self._g('xaxis ticklabel off')
self._g('yaxis bar off')
self._g('yaxis label ""')
self._g('yaxis tick off')
self._g('yaxis ticklabel off')
self._g('xaxis tick major linestyle 1')
self._g('xaxis tick major grid off')
self._g('yaxis tick major linestyle 1')
self._g('yaxis tick major grid off')
# TODO: How do we turn off axes lines?
def _get_linespecs(self, item):
"""
Return the line marker, line color, line style, and
line width of the item.
"""
marker = self._markers[item.getp('linemarker')]
color = self._colors[item.getp('linecolor')]
style = self._line_styles[item.getp('linetype')]
width = item.getp('linewidth')
return marker, color, style, width
def _fix_latex(self, legend):
"""Remove latex syntax a la $, \, {, } etc."""
legend = legend.strip()
# General fix of latex syntax (more readable)
legend = legend.replace('**', '^')
#legend = legend.replace('*', '')
legend = legend.replace('$', '')
legend = legend.replace('{', '')
legend = legend.replace('}', '')
legend = legend.replace('\\', '')
return legend
def _add_line(self, item, name):
"""Add a 2D or 3D curve to the scene."""
if DEBUG:
print "Adding a line"
# get data:
x = item.getp('xdata')
y = item.getp('ydata')
z = item.getp('zdata')
# get line specifiactions:
marker, color, style, width = self._get_linespecs(item)
self._g('s%s on' % name)
self._g('s%s symbol %s' % (name,marker))
self._g('s%s symbol fill pattern 0' % name)
self._g('s%s symbol size 0.6' % name)
self._g('s%s symbol color %s' % (name,color))
self._g('s%s line color %s' % (name,color))
if style is not None:
self._g('s%s linestyle %s' % (name,style))
else:
if not marker:
self._g('s%s linestyle 1' % name) # solid line
else:
self._g('s%s linestyle 0' % name) # no line
if not width:
width = 1.0
self._g('s%s linewidth %s' % (name,width))
if z is not None:
# zdata is given, add a 3D curve:
pass
else:
# no zdata, add a 2D curve:
for i in range(len(x)):
self._g('s%s point %s, %s' % (name, x[i], y[i]))
legend = self._fix_latex(item.getp('legend'))
self._g('s%s legend "%s"' % (name,legend))
def _add_surface(self, item, shading='faceted'):
if DEBUG:
print "Adding a surface"
x = item.getp('xdata') # grid component in x-direction
y = item.getp('ydata') # grid component in y-direction
z = item.getp('zdata') # scalar field
c = item.getp('cdata') # pseudocolor data (can be None)
contours = item.getp('contours')
if contours:
# the current item is produced by meshc or surfc and we
# should therefore add contours at the bottom:
self._add_contours(contours, placement='bottom')
if item.getp('wireframe'):
# wireframe mesh (as produced by mesh or meshc)
pass
else:
# colored surface (as produced by surf, surfc, or pcolor)
# use keyword argument shading to set the color shading mode
pass
def _add_contours(self, item, placement=None):
# The placement keyword can be either None or 'bottom'. The
# latter specifies that the contours should be placed at the
# bottom (as in meshc or surfc).
if DEBUG:
print "Adding contours"
x = item.getp('xdata') # grid component in x-direction
y = item.getp('ydata') # grid component in y-direction
z = item.getp('zdata') # scalar field
filled = item.getp('filled') # draw filled contour plot if True
cvector = item.getp('cvector')
clevels = item.getp('clevels') # number of contour levels
if cvector is None:
# the contour levels are chosen automatically
#cvector =
pass
location = item.getp('clocation')
if location == 'surface':
# place the contours at the corresponding z level (contour3)
pass
elif location == 'base':
if placement == 'bottom':
# place the contours at the bottom (as in meshc or surfc)
pass
else:
# standard contour plot
pass
if item.getp('clabels'):
# add labels on the contour curves
pass
def _add_vectors(self, item):
if DEBUG:
print "Adding vectors"
# uncomment the following command if there is no support for
# automatic scaling of vectors in the current plotting package:
#item.scale_vectors()
# grid components:
x, y, z = item.getp('xdata'), item.getp('ydata'), item.getp('zdata')
# vector components:
u, v, w = item.getp('udata'), item.getp('vdata'), item.getp('wdata')
# get line specifiactions (marker='.' means no marker):
marker, color, style, width = self._get_linespecs(item)
# scale the vectors according to this variable (scale=0 should
# turn off automatic scaling):
scale = item.getp('arrowscale')
filled = item.getp('filledarrows') # draw filled arrows if True
if z is not None and w is not None:
# draw velocity vectors as arrows with components (u,v,w) at
# points (x,y,z):
pass
else:
# draw velocity vectors as arrows with components (u,v) at
# points (x,y):
pass
def _add_streams(self, item):
if DEBUG:
print "Adding streams"
# grid components:
x, y, z = item.getp('xdata'), item.getp('ydata'), item.getp('zdata')
# vector components:
u, v, w = item.getp('udata'), item.getp('vdata'), item.getp('wdata')
# starting positions for streams:
sx, sy, sz = item.getp('startx'), item.getp('starty'), item.getp('startz')
if item.getp('tubes'):
# draw stream tubes from vector data (u,v,w) at points (x,y,z)
n = item.getp('n') # no points along the circumference of the tube
scale = item.getp('tubescale')
pass
elif item.getp('ribbons'):
# draw stream ribbons from vector data (u,v,w) at points (x,y,z)
width = item.getp('ribbonwidth')
pass
else:
if z is not None and w is not None:
# draw stream lines from vector data (u,v,w) at points (x,y,z)
pass
else:
# draw stream lines from vector data (u,v) at points (x,y)
pass
pass
def _add_isosurface(self, item):
if DEBUG:
print "Adding a isosurface"
# grid components:
x, y, z = item.getp('xdata'), item.getp('ydata'), item.getp('zdata')
v = item.getp('vdata') # volume
c = item.getp('cdata') # pseudocolor data
isovalue = item.getp('isovalue')
def _add_slices(self, item):
if DEBUG:
print "Adding slices in a volume"
# grid components:
x, y, z = item.getp('xdata'), item.getp('ydata'), item.getp('zdata')
v = item.getp('vdata') # volume
sx, sy, sz = item.getp('slices')
if rank(sz) == 2:
# sx, sy, and sz defines a surface
pass
else:
# sx, sy, and sz is either numbers or vectors with numbers
pass
pass
def _add_contourslices(self, item):
if DEBUG:
print "Adding contours in slice planes"
# grid components:
x, y, z = item.getp('xdata'), item.getp('ydata'), item.getp('zdata')
v = item.getp('vdata') # volume
sx, sy, sz = item.getp('slices')
if rank(sz) == 2:
# sx, sy, and sz defines a surface
pass
else:
# sx, sy, and sz is either numbers or vectors with numbers
pass
cvector = item.getp('cvector')
clevels = item.getp('clevels') # number of contour levels per plane
if cvector is None:
# the contour levels are chosen automatically
#cvector =
pass
pass
def _set_figure_size(self, fig):
if DEBUG:
print "Setting figure size"
width, height = fig.getp('size')
if width and height:
# set figure width and height
self._g('page resize %s, %s' % (width,height))
else:
# use the default width and height in plotting package
pass
def _replot(self):
"""Replot all axes and all plotitems in the backend."""
# NOTE: only the current figure (gcf) is redrawn.
if DEBUG:
print "Doing replot in backend"
fig = self.gcf()
# add Grace attributes to current figure (if not already added):
try:
fig._g
except:
self.figure(self.getp('curfig'))
# reset the plotting package instance in fig._g:
no_lines = fig._g._no_lines_in_graph
no_graphs = len(no_lines)
# erase all lines in every graph:
for g in range(no_graphs):
for i in range(no_lines[g]):
fig._g('kill g%s.s%s' % (g,i))
no_graphs = len(fig.getp('axes'))
fig._g._no_lines_in_graph = [0]*no_graphs
self._set_figure_size(fig)
hgap = 0.5
vgap = 0.6
offset = 0.1
nrows, ncolumns = fig.getp('axshape')
fig._g('arrange(%s, %s, %s, %s, %s)' % \
(nrows, ncolumns, offset, hgap, vgap))
for axnr, ax in fig.getp('axes').items():
curr_graph = axnr-1
numberofitems = ax.getp('numberofitems')
pth = ax.getp('pth')
if pth:
# create axes in tiled position
# this is subplot(nrows,ncolumns,pth)
fig._g('focus g%s' % curr_graph)
fig._g('with g%s' % curr_graph)
if numberofitems == 0:
self._g('g%s hidden true' % curr_graph)
else:
fig._g('with g%s' % curr_graph)
fig._g('g%s on' % curr_graph)
i = 0
legends = []
plotitems = ax.getp('plotitems')
plotitems.sort(self._cmpPlotProperties)
for item in plotitems:
name = str(i)
func = item.getp('function') # function that produced this item
if isinstance(item, Line):
self._add_line(item, name)
fig._g._no_lines_in_graph[curr_graph] += 1
elif isinstance(item, Surface):
self._add_surface(item, shading=ax.getp('shading'))
elif isinstance(item, Contours):
self._add_contours(item)
elif isinstance(item, VelocityVectors):
self._add_vectors(item)
elif isinstance(item, Streams):
self._add_streams(item)
elif isinstance(item, Volume):
if func == 'isosurface':
self._add_isosurface(item)
elif func == 'slice_':
self._add_slices(item)
elif func == 'contourslice':
self._add_contourslices(item)
legend = self._fix_latex(item.getp('legend'))
if legend:
# add legend to plot
legends.append(legend)
i += 1
if numberofitems > 0:
self._g('autoscale')
self._set_axis_props(ax)
if legends:
self._g('legend on')
if self.getp('show'):
# display plot on the screen
if DEBUG:
print "\nDumping plot data to screen\n"
debug(self)
pass
self._g('redraw')
[docs] def hardcopy(self, filename, **kwargs):
"""
Supported extensions in the Grace backend:
'.ps' (PostScript)
'.eps' (Encapsualted PostScript)
'.pdf' (Portable Document Format)
'.agr' (Grace file format)
'.jpg' (Joint Photographic Experts Group)
'.png' (Portable Network Graphics)
'.pnm' (Portable Any Map)
'.svg' (Scalable Vector Graphics)
'.gmf' (Graphics Meta File)
'.mif' (Maker Interchange Format)
Optional arguments:
========== ======================================================
Argument Description
========== ======================================================
size A tuple (width,height) to set the size of the image.
The default is to use the Grace default.
dpi Dots per inch (Grace default is used as default).
antialiase Enable (True) or disable (False) font antialiasing.
Default is to enable antialiasing.
color True (colors) or False (grayscale).
orientation 'portrait' or 'landscape' (default). Only available
for PostScript output.
quality Integer between 0 and 100 (default). Sets the quality
in a JPEG image.
========== ======================================================
"""
self.setp(**kwargs)
color = self.getp('color')
replot = kwargs.get('replot', True)
if replot:
self._replot()
if DEBUG:
print "Hardcopy to %s" % filename
ext2dev = {'.agr': 'agr', '.eps': 'EPS', '.jpg': 'JPEG',
'.gmf': 'Metafile', '.mif': 'MIF', '.pdf': 'PDF',
'.png': 'PNG', '.pnm': 'PNM', '.ps': 'PostScript',
'.svg': 'SVG'}
basename, ext = os.path.splitext(filename)
if not ext:
ext = '.ps' # no extension given, assume .ps
filename += ext
elif ext not in ext2dev:
raise ValueError("hardcopy: extension must be %s, not '%s'" % \
(ext2dev.keys(), ext))
device = ext2dev[ext]
if ext == '.agr':
self._g('saveall "%s"' % filename)
else:
self._g('hardcopy device "%s"' % device)
width, height = kwargs.get('size', (None,None))
if width and height:
self._g('device "%s" page size %s, %s' % (device,width,height))
dpi = kwargs.get('dpi', None)
if dpi:
self._g('device "%s" dpi %s' % (device,dpi))
antialiase = kwargs.get('antialiase', True)
if antialiase:
self._g('device "%s" font antialiasing on' % device)
else:
self._g('device "%s" font antialiasing off' % device)
if device in ['EPS', 'PostScript', 'JPEG']:
colormode = 'color'
if not color:
colormode = 'grayscale'
self._g('device "%s" op "%s"' % (device,colormode))
if device in ['EPS', 'PostScript']:
pass # set orientation
if device in ['JPEG']:
quality = kwargs.get('quality', 100)
self._g('device "%s" op "quality:%d"' % (device,quality))
if device in ['PNM']:
format = 'ppm'
if not color:
format = 'pgm'
self._g('device "%s" op "format:%s"' % (device,format))
self._g('print to "%s"' % filename)
self._g('print')
def _close(self, fig):
try:
fig._g.exit()
except OSError, msg:
print msg
[docs] def clf(self):
fig = gcf()
self._close(fig)
del fig._g
BaseClass.clf(self)
[docs] def closefig(self, num=None):
if not num: # no figure given, close current figure
num = self._attrs['curfig']
fig = self._figs[num]
self._close(fig)
del fig._g
[docs] def closefigs(self):
for num in self._figs.keys():
self.closefig(num)
BaseClass.closefigs(self)
# implement colormap functions here
#def jet(self, m=None):
# """Variant of hsv."""
# pass
# Now we add the doc string from the methods in BaseClass to the
# methods that are reimplemented in this backend:
for cmd in BaseClass._matlab_like_cmds:
if not '__' in cmd and hasattr(BaseClass, cmd):
m1 = eval('BaseClass.%s' % cmd)
try:
m2 = eval('%s' % cmd)
except NameError:
pass
else:
if m1.__doc__ != m2.__doc__:
if m2.__doc__ is None:
m2.__doc__ = ""
m2.__doc__ = m1.__doc__ + m2.__doc__
plt = GraceBackend() # create backend instance
use(plt, globals()) # export public namespace of plt to globals()
backend = os.path.splitext(os.path.basename(__file__))[0][:-1]